Many people know that it's very difficult to decorate on rainy days, because the weather is wet, the furniture can only be painted for a long time, and it takes a long time after the floor is laid to make the cement grip the floor. The hidden danger. Whether or not the rainy season should be renovated, how can it be renovated? In fact, the quality of decoration is not determined by the season. The determining factors are management and craftsmanship. With the current development of building materials technology and continuous improvement of the decoration process, as long as the rainy season features to take appropriate measures, the rainy season construction of all kinds of disadvantages can be eliminated. Experts pointed out that consumers should pay attention to the following aspects when selecting materials for the rainy season decoration: Under normal circumstances, the moisture content of the board can neither be too high nor too low, and the moisture content does not exceed 12%. Therefore, when purchasing sheets in the rainy season, avoid the rainy days and choose to dry them properly. Before scraping the putty on the wall, wipe the putty with a dry cloth and wipe off the wet steam. After the completion of the local brick paving, the cement solidification speed slowed down due to the weather, so the floor tiles could not be stepped on immediately after the paving was completed, and a springboard must be installed. In the rainy season, due to the humidity of the atmosphere, the wall and the furniture are not easy to dry after being painted. At this time, we must not be rushed. We must wait for the first coat of paint to dry out before we can paint the second pass of paint. At the same time, when the site is occupied, all doors and windows should be opened to ensure timely ventilation. Materials in the rainy season are prone to swell. For example, the gap between the door leaf and the door frame should be less than 2mm. However, during the apricot season, this seam will stay longer than the dry season. Adding some moisture-proof factors to the waterproof coating makes it relatively easy to absorb moisture, which can reduce the impact of Huangmei season construction. In general, high-density, oil-bearing wood has good waterproof effect, and it is not easy to absorb moisture. For example, the stability of heavy ant wood and pineapple lattice is also good. If a layer of moisture-proof film is applied on the floor, it will be better. Moisture-proof effect. Clapboard material, good? Ms. Huang asked: I am going to refurbish. My new home is a frame structure. I want to knock down and re-lay out the original wall. I notice that most of my upstairs and downstairs are separated by six bricks. What else can I use for bricks? Do the partition board, blockboard or plasterboard is good, to several layers? A: Light steel keel cement board, around RMB 30/m. Not easy to crack, gypsum board is easy to absorb moisture. The vertical keel spacing should be less than or equal to 40cm. The fewer the joints between the plates, the better. The screws are better and the screw heads should not be exposed. The partition wall of the bathroom is best to use brick mud to stick tiles. If the opening is relatively large, if the conditions allow, or light brick is best, followed by light steel keel plus gypsum board. Few with blockboard. I do not know if this is a family home or unit? If the family can use light masonry to do, the unit can use 100 series light steel keel gypsum board partition wall, embedded noise cotton is best, if conditions can be used 12 thick gypsum board Or double dislocation 95 gypsum board. Why do you leave a 5 mm wall? Mr. Lin asked: Does the shop need to leave a 5mm gap at the edge of the laminate flooring? What kind of treatment should be left for this gap? See a lot of posts and say that the floor should be left blank to prevent the thermal expansion and contraction of the floor. The main question is to ask if the gap left behind needs to be dealt with in other ways, or is it just so empty, and is it directly paving the footpath? Or is it to be filled with other materials? Thank you. Answer: This gap should not be filled. It is mainly used for the thermal expansion and contraction of the floor. It can be covered with a foot line. Leave it empty, otherwise it's no use. The kick line can be pressed without affecting the appearance. In addition, whoever buys the floor will help you to install it, free of charge and does not require you to worry about these things. Links:>>> Seven Issues to Be Noted in Winter Decoration Nature Flooring Del Floor Paint Cement Home Improvement Furniture Windows Floor Tiles Bathrooms Waterproof Toilet Tiles Bathroom Tiles Bathroom Doors Floor Tiles
The camera street light is used to use the infrared network high definition intelligent ball's various features so that it can be widely used in the need of large-scale hd quality control of the site.
Functional properties
â‘ Smart Function:Smart Tracing,Smart Inspecting,Smart Road Monitor
â‘¡System Function:Smart Video,Smart Photo Enhancement
â‘¢Movement Function
â‘£Network Function
Camera Lights,Camera Lights Action,Camera Lights For Sale,Lights Camera Color Jiangsu chengxu Electric Group Co., Ltd , https://www.chengxulightings.com