Liquid crystal dimming film (polymer-dispersed liquid crystal) glass is a mild laminated glass that can instantly become transparent or opaque by switching the power supply using a dimming film. When the power is off, the incoming visible light scattering passes through the liquid crystal dimming film, and the film becomes translucent; When energized, the incoming visible light transmission liquid crystal dimming film, the film becomes clear. Intelligent dimming glass is made of two layers of glass with a layer of liquid crystal film (commonly known as dimming film, LC film) sandwiched between them. The liquid crystal film is covered in the center by PVB film, and then placed in an autoclave or a general one-step furnace through the process of high temperature and high pressure. In addition to the privacy protection function, the intelligent dimming glass has the application characteristics of all safety glasses (explosion-proof and crack proof). TQX Intelligent glass film integrates R&D/design/production/sales/installation/service; More than 30000 square meters production base+more than 5000 square meters high standard purification workshop There are a number of independent "patents" and a number of "certification"
PDLC Smart Glass,Dimming Glass For Building,Smart Glass Home Decoration,Switchable Glass Privacy Protection,Smart Laminated Building Glass,Office Frosted PDLC Glass Tianqixun Technology , https://www.tqxdisplay.com
Analysis of the working principle of vane pump
Single role: The vane is inlaid in the groove, can slide freely, when the rotation is generated, the vane is thrown to the pump shell under centrifugal action. The vane pump is a positive displacement pump, and the adjacent two vanes move to the bottom When the rotor rotates clockwise, the adjacent two vanes experience the volume increasing process from the bottom to the top. Therefore, the oil absorption (from the fourth quadrant To the second quadrant); from the top to the bottom is the volume reduction process, so press the oil (from the second to the fourth quadrant). Double action: When the motor drives the rotor to rotate, the vane protrudes outwards under the double action of centrifugal force and pressure oil at the bottom of the vane, and the top of the vane sticks to the inner surface of the stator. The four vanes on the four concentric circular arcs respectively form four sealed working oil chambers with the outer surface of the rotor, the inner surface of the stator and the two valve plates. These oil chamber with the rotation of the rotor, seal the working oil chamber produce small to big or small to small changes, can be through the oil distribution window suction port (connected to the suction port) or drain window (connected to the drain port) Inhale or extrude the oil. In the rotor per revolution, each working oil chamber to complete two oil and oil pressure, so called double-acting vane pump, due to symmetrical symmetry between high and low pressure chamber, the shaft force balance, unloading type. Vane pumps equipped with small power, large flow, gas stations, oil depots, chemicals, refineries, aviation kerosene, the best choice for refueling ships.