Good quality New design polyurea paint/coating / Polyurea Waterproof coating  Application Metal, concrete, wood and foam roofing. The polyurea elastomer coating now has many advantages over the earlier developed polyurethane, polyurethane \ polyurea technology: No. Item Index I II 1 Color Optional 2 Solid 100% 3 Gel time 10 seconds 4 Mixing ratio(by volume) 1.1:1 5 Flash point >200°C 6 Recommended spreading thickness 1-2mm 7 Drying time Temperature, humidity and film thickness dependent  Performance characteristics No. Item Specification 1 Flash point >200°C 2 Tensile strength 15Mpa 21Mpa 3 Tensile elongation 350% 520% 4 Tear strength 59 KN/m 78 KN/m 5 Impact resistance 1.5Kg·m 1.5Kg·m 6 Adhesion 2.6Mpa 2.6Mpa 7 Hardness Shore A85-95 Shore A80-90 8 Water impermeability, 0.4Mpa×2h Impermeable 9 Specific gravity 1.02g/cm3 1.02g/cm3 10 Service temperature -50°C-150°C Packing Part A: 220kg /drum Part B: 200kg/drum Storage condition Installation instruction a. Surface preparation Surface must be properly prepared. Remove all oil, dust, grease, dirt etc to ensure adequate adhesion.  b. Application condition Temperature: Air and surface: -20°C-40°C Relative humidity: ≤90% After sales service(24hours online)
The Tinhy's Geocell of geosynthetic cellular confinement system is a matrix of lightweight, expandable and flexible thermoplastic strips that are ultrasonically bonded to form a strong, dimensionally stable and inert honeycomb structure.
The geocell is honeycombed three-dimensional grid structure which is welded by high-strength HDPE sheet. The geocell is easy to stretch. It can be folded up when transport and opened to fill the earth or concrete when use it. It will constitute a strong lateral and large stiffness of the structure when use it. In the geotechnical engineering, soil, sand, stone, concrete and other fill together constitute a different cohesion, different reinforcement strength, different depth of the cushion. The cushion can be placed in the required position accordance with the requirements of the project for Reinforcement of roads, railways and soft soil foundation, slope protection, green structure, the construction of retaining walls and so on. The most important feature is can solve and complete a variety of difficult problems which can`t be dealed with use conventional method in geotechnical engineering,such as bridge jumping, soft base subsidence, fouling, landslides and desert subgrade.
Appliction:
The geocell is honeycombed three-dimensional grid structure which is welded by high-strength HDPE sheet. The geocell is easy to stretch. It can be folded up when transport and opened to fill the earth or concrete when use it. It will constitute a strong lateral and large stiffness of the structure when use it. In the geotechnical engineering, soil, sand, stone, concrete and other fill together constitute a different cohesion, different reinforcement strength, different depth of the cushion. The cushion can be placed in the required position accordance with the requirements of the project for Reinforcement of roads, railways and soft soil foundation, slope protection, green structure, the construction of retaining walls and so on. The most important feature is can solve and complete a variety of difficult problems which can`t be dealed with use conventional method in geotechnical engineering,such as bridge jumping, soft base subsidence, fouling, landslides and desert subgrade.
1.soil retention --earth walls
Specification:
Item No.
Hight
Weld distance
Thickness of the Sheet
Tensile Strength of Welding Points
Tensile Strength of Connection of Cells
Tensile Strength at Yield of Each Sheet
GS-50-400
50
330≤A<1000
≥1.1
≥100
≥120
≥20
GS-75-400
75
330≤A<1000
≥1.1
≥100
≥120
≥20
GS-100-400
100
330≤A<1000
≥1.1
≥100
≥120
≥20
GS-150-400
150
330≤A<1000
≥1.1
≥100
≥120
≥20
GS-200-400
200
330≤A<1000
≥1.1
≥100
≥120
≥20
Geocell Plastic Hdpe Geocell For Road,Plastic Honeycomb Hdpe Geocell,Plastic Geocell,Hdpe Geocell Shandong Tianhai New Materials Engineering Co., Ltd , http://www.chinatinhy.com
Â
Descriptions:
a 100% solid, fast set, spray-applied, two component aromatic polyurea elastomer. The system consists of the A component, a quasi-prepolymer rich of free NCO, and the B component, a mixture of polyetheramine, amine extenders and other additives. The unique polyurea chemistry allows this material to be tolerant of moisture and lower temperatures during application. This means that high humidity and hidden moisture in concrete has minimal effect on the application of this product.
Designed for use as a smooth seamless waterproof lining coating system for interior and a roof and wall coating system for exterior applications. Ideally suitable for use in areas including:
1. Curing speed, in the vertical plane will not produce sagging, cross-linking speed of 2-6 s, 6-9s can reach the level of non-stick hand, 30s can walk on it. 30min to put into use.
2 is not sensitive to temperature and humidity, high humidity and low temperature on the polyurea elastomer coating performance is quite small.
3 100% solid content, two-component coating, single coating system, spray coating can reach a fairly thick 2000UM above, without solvent, zero VOC.
4. Outstanding physical properties, tensile strength 14-21MPA, stretching 2% - 520% between.
5, heat resistance, thermal stability of 177 degrees, (350T)
6. Compatibility with the pigment is very good, you can adjust the color.
7. Adjustable formula, from soft to hard polymer coating.
8. Can be enhanced, in the spraying process can be added to enhance the glass fiber.
Technical data
Â
SHOUGUANG MINGDING WATERPROOF MATERIALS CO.,LTD
SHOUGUANG FENGYUAN COMMERCIAL CO.,LTD
SALES MANAGER:
MS ALICE
MOBILE:008613606475587
-------------------------------------------------------
MR YONG
MOBILE:008613305360330
2.load support --roadways and verges
--sidewalk
--railway batses
3.slope protection --vegetative slope
--road side banks
--embankment
4.channel protection --embankment walls
--waterway channels
(mm)
(mm)
(mm)
(N/cm)
(N/cm)
(N/mpa)
Packing:
Polyurea Coating Resin Swimming Pools Waterproof Paint
Model NO.: FYPP
Certification: ISO14001, CCC, RoHS, ISO9001
Substrate: Any
Components: Polyurea
Formation Mechanism: Conversion Type
Viscosity(25ºC): Equal and Less 1000MPa.S
Tensible Strength: 13MPa
Gel Time: 10 Sec
Adhesive Force: 2.6/2.8
Density (g/cm3): 1.02
Shock Resistanc: 1.5
State: Liquid Coating
Main Materials: Polyurethane
Elongation at Br: 350/520
Tear Strength: 59/78
Trademark: KING CRAFT
Transport Package: by Barrels, Then Plastic Film Wraped
Specification: 220kg/barrel 200kg/barrel
Origin: China
SALES CONTACT:Â