Analysis of working principle of blue fine aluminum alloy diaphragm pump

Aluminum alloy diaphragm pump is a new type of conveying machine. It uses compressed air as the power source. It can pump light for various corrosive liquids, liquid with particles, high viscosity, volatile, flammable and highly toxic liquid. Do it. The main feature of the aluminum alloy diaphragm pump is that it does not need to be irrigated, it can pump the flowing liquid, and it can transport some medium which is easy to flow. The suction stroke is high and the lift head can be adjusted (0-50 meters). The source pressure should only be greater than 1kg. /cm2 can work, absolutely fireproof and explosion-proof, with all the functions of submersible pump, self-priming pump, impurity pump, shield pump, mud pump and many characteristics of conveying machinery.

Aluminum alloy pneumatic diaphragm pump is a new type of conveying machine, which is the most novel type of pump in China. Compressed air is used as the power source. For various corrosive liquids, liquids with particles, high viscosity, volatile, flammable and highly toxic liquids can be exhausted. The diaphragm pump uses nitrile rubber, neoprene rubber, fluororubber, polytetrafluoroethylene, and polytetraethylene ethylene according to different liquid media. To meet the needs of different users. It is placed in various special occasions and used to pump media that cannot be pumped by conventional pumps, and has achieved satisfactory results.

In the two symmetric working chambers of the diaphragm pump, each is equipped with a flexible diaphragm, and the connecting rods form the two diaphragms into one body. After the compressed air enters the valve from the intake joint 1 of the pump, the two working chambers are pushed. The inner diaphragm drives the two diaphragms connected by the link to move synchronously. At the same time, the gas in the other working chamber exits the pump from the back of the diaphragm. Once the end of the trip is reached. The valve train automatically introduces compressed air into the other working chamber, pushing the diaphragm in the opposite direction, thus forming a synchronous reciprocating motion of the two diaphragms. Two one-way ball valves are arranged in each working chamber, and the reciprocating motion of the diaphragm causes a change in the inner volume of the working chamber, forcing the two one-way ball valves to be alternately opened and closed, thereby continuously sucking in and discharging the liquid.



This article reprinted: http://