7.5M Measuring Tape,Tape Measure Tool,Precision Tape Measure,Tape Measure For Sale SHANGQIU CHAOYUE MEASURING TOOLS CO., LTD , https://www.equipmentool.com
1. Do not abuse the machine. Try to avoid excessive knocking on the ground. Do not hit the ground with very heavy or hard objects. Unless necessary for work, avoid frequent unnecessary wear. Especially for the ESL floor, in order to maintain its smoothness, beauty and appearance, special attention should be paid to avoiding traffic such as steel wheels; do not have heavy traffic and loads, and avoid contact with the ground to avoid scratches.
2. Surface cleaning, epoxy floor surface cleaning method is simple, generally scrubbed with water. If the stains are washed clean, use a cleaning agent, industrial degreasing agent, detergent, etc., and then rinse with water. For quite stubborn stains, mechanical cleaning methods can also be used, but do not put pressure on the ground, wear too much to affect the leveling and luster of the ground.
3. Avoid chemical pollution
4. All personnel entering the workshop must change their shoes (so as not to scratch the ground when the surface mud is brought into the workshop);
5, all hardware: such as iron chairs, iron tables, iron shelves, etc., their feet should be wrapped with soft plastic or rubber in order to avoid scratching the ground during use;
6. When cleaning the floor, please use a soft mop or wet or dry vacuum cleaner, which can be cleaned with clean water or detergent, but please note that the floor is slippery;
7, carts, cart wheels please use hard or elastic rubber wheel, and plant inside and outside the use of separate;
8, if the use of time due to wear or scratches, a small area can be repaired, if the area is larger, it is recommended to re-roll once.
Floor maintenance requirements
Specific floor maintenance requirements: