The LED Linear Light is widely used at Office, Supermarket, Shopping mall, Hotel, showroom and so on.
The advantages for DiLin LED Linear Light
1. Fashion design with high quality of aluminum housing and constuction to make sure the cooling of LED Linear Light good enough.
2. High quality of COB and driver solution to make sure LED Linear Light quality stable enough.
3. Strong Engineer & QC team are good at customizing and offer flexible solution for competitive Linear Light .
4. Pendant, track rail, recessed and surface mounted installation method are avaliable.
5. Fast lead time: 5-7days for samples and 15-25days for bulk order.
6. 3 or 5 year warranty with standardized after-sale serivce process.
Led Linear Light,Black Linear Light Fixture,Flexible Led Linear Lights,Linear Dining Light Jiangmen Dilin Lighting High-Tech Co., Ltd. , https://www.jmdilinled.com
2. When the grinding roller device of Raymond Mill equipment is used for more than 500 hours, the rolling bearings in the roller sleeve must be cleaned when replacing the grinding roller. The damaged parts should be replaced in time. The refueling tool can be used with manual fuel pump and grease gun. .
3, fineness adjustment, according to the size of the material, soft and hard, water content, specific gravity is different, the thickness of the processing is also different, can be adjusted above the analyzer, high speed, high fineness, low speed, fineness. If the fineness is increased, the output will be reduced accordingly. If the requirements are not met, the fan speed should be adjusted, and the user can flexibly control.
4. When parking, stop the feeding first, and the main machine continues to rake, so that the remaining abrasives continue to grind. After about one minute, the main motor and analyzer motor can be turned off to stop the grinding, and then the fan motor is stopped. In order to blow off the remaining powder.
Raymond Mill Replacement Roller and Mill Ring Cycles and Precautions
1. In order to make Raymond Mill equipment powder machine normal, a “Safety Operation System for Equipment Maintenance†should be established and the operator must have a certain level of technology. The mill's principle performance and operating procedures are well understood to ensure Raymond Mill’s The long-term safe operation of the powder equipment, and at the same time after the mill equipment has been operating for a period of time, it is necessary to carry out necessary inspections, replace the wearing parts in time and pay attention to whether or not grease is added to the grease.