Three major steps to make the wrought iron gates perfect construction

/ June 16, 2023

As the taste of life continues to increase, people's eyes begin to shift to the taste of the details of the decoration. In the current architectural decoration, because the iron art can be soft and flexible, it has good expressive power, and the depiction of details has unparalleled advantages of other materials, and it is also more and more thick, firm, wearable and unique. Users are favored. Iron gates often appear in people's lives, what is its construction plan? Then Jiuzheng building materials Xiaobian for everyone to explain.

First, construction preparation:

When making a good wrought iron gate, there must be a factory certificate and test report. The specifications, model and size should meet the design requirements. Put the window code in a safe place, pad the wood and cover it. Avoid mistakes, otherwise it will not cooperate well with customers in the later period.

Play the wrought iron gate position line and determine the installation elevation according to the 50cm horizontal line.

The unpacking, inspection and transportation of the iron gate is even more important because the customer does not want to destroy the wrought iron gate during the transportation process. Check the model and check the quality of the wrought iron according to the drawings. If it is found that the corners are not sharp and the warpage is uneven, the deviation exceeds the standard, the scratches are severely damaged, and the color difference is large. It should be carefully negotiated, and after being qualified, it can be installed. Also, check the wrought iron gate with a protective film. If there is any defect, it should be re-sticked before construction. Prepare the scaffolding for installation and take safety precautions. Because safe production is the principle we have been pursuing.

Second, the construction points:

The opening of the iron gate:

The iron installation adopts the installation method of the plug after the reserved hole. The horizontal position of the iron art hole should be based on the 50cm line of the wall, and the upper part of the iron wall should be measured upwards, and the height of the window should be measured and the line should be straight. In order to ensure that the windows of each layer are up and down, the theodolite is used to hit the lines on both sides. The gap between the plastic steel frame and the wall is 10-15mm on each side.

Iron gates are connected to the wall:

The iron door frame is connected to the wall with fixed iron. That is, the iron piece is installed in the outer slot of the window frame by using a self-tapping screw, and then the wrought iron door frame is sent into the hole to be positioned, the positioning portion passes through the reserved hole of the iron piece, and the hole is drilled in the opposite position of the wall and inserted into the hole. Tube, tighten the expansion tube screw to fix the iron piece to the wall.

In fact, the simple statement can also be attributed to the following three points:

First, the material inspection

Second, the quality inspection table

Third, concealed works

However, Jiuzheng Building Materials Xiaobian suggested that it is best to consult the engineers at Xi'an Iron Gate before the construction to see how to do it. This is the only way to adapt to local conditions and perfect construction.  

LSAW STEEL PIPE

  • Specification:
  • 1. Out diameter: 406.4mm - 1422.4mm (16"-56")
  • 2. Thickness: 9.5mm-38.1mm
  • 3. Length: 6m-12.5m
  • 4. Type: LSAW (Longitudinal Submerged-Arc Welded), DSAW (Double Submerged-arc welded) Steel Pipe
  • 5. Manufacturing Process:JCO(JCOE,COE)
  • 6. Standard: API SPEC 5L (ISO 3183), GB/T 9711.1, GB/T 9711.2, GB/T 9711.3 BSEN10217
  • 7. Uses: for conveying gas, water and oil, in the oil or natural gas industries
  • 8. Chemical Analysis (%):
  • Standard Type of pipe Class Grade C max Si max Mn max P max S max V max Nb max Ti max
    API SPEC 5L
    /ISO 3183     		WELD PSL1 L245 B 0.26 - 1.2 - 0.03 0.03 - -
    L290/X42 0.26 - 1.3 - 0.03 0.03 - -
    L320/X46 0.26 - 1.4 - 0.03 0.03 - -
    L360/X52 0.26 - 1.4 - 0.03 0.03 - -
    L390/X56 0.26 - 1.4 - 0.03 0.03 - -
    L415/X60 0.26 - 1.4 - 0.03 0.03 - -
    L450/X65 0.26 - 1.4 - 0.03 0.03 - -
    L485/X70 0.26 - 1.4 - 0.03 0.03 - -
    PSL2 L245M/GR.BM 0.22 0.45 1.2 0.025 0.015 0.05 0.05 0.04
    L290M/X42M 0.22 0.45 1.3 0.025 0.015 0.05 0.05 0.04
    L320M/X46M 0.22 0.45 1.3 0.025 0.015 0.05 0.05 0.04
    L360M/X52M 0.22 0.45 1.4 0.025 0.015 - - -
    L390M/X56M 0.22 0.45 1.4 0.025 0.015 - - -
    L415M/X60M 0.12 0.45 1.6 0.025 0.015 - - -
    L450M/X65M 0.12 0.45 1.6 0.025 0.015 - - -
    L485M/X70M 0.12 0.45 1.7 0.025 0.015 - - -
    L555M/X80M 0.12 0.45 1.85 0.025 0.015 - - -
  • 9. Mechanical Properties
  • Standard Class Grade Yield Strength (MPa) Tensile Strength (MPa) Elongation(%) Y.S/T.S
    API SPEC 5L
    /ISO 3183     		PSL1 L245 B min 245 415 b -
    L290/X42 min 290 415 b -
    L320/X46 min 320 435 b -
    L360/X52 min 360 460 b -
    L390/X56 min 390 490 b -
    L415/X60 min 415 520 b -
    L450/X65 min 450 535 b -
    L485/X70 min 480 470 b -
    PSL2 L245N/BN
    L245M/BM     		min 245 415 b -
    max 450 760 b 0.93
    L290N/X42N
    L290M/X42M     		min 290 415 b -
    max 495 760 b 0.93
    L320N/X46N
    L320M/X46M     		min 320 435 b -
    max 525 760 b 0.93
    L360N/X52N
    L360M/X52M     		min 360 460 b -
    max 530 760 b 0.93
    L390N/X56N
    L390M/X56M     		min 390 490 b -
    max 545 760 b 0.93
    L415N/X60N
    L415M/X60M     		min 415 520 b -
    max 565 760 b 0.93
    L450M/X65M min 450 535 b -
    max 600 760 b 0.93
    L485M/X70M min 485 570 b -
    max 635 760 b 0.93
    L555M/X80M min 555 625 b -
    max 705 825 b 0.93

LSAW Steel Pipe,LSAW Steel Tube,LSAW L360 Steel Pipe ,LSAW L485 Steel Pipe

HeBei GuangHao Pipe Fittings Co .,LTD (Cangzhou Sailing Steel Pipe Co., Ltd) , https://www.guanghaofitting.com

You may also like