The analysis of the diversity of the load-bearing force tester load classification data From the end of 2010, the market of the insertion force test machine is diverse, and the models and parameters of the quotation are basically inseparable, and even the pictures are the same. The unit price is also a difference of nearly 10,000 pieces, so that customers are at a loss when purchasing. After these months of market research, our company has a detailed understanding of the current plug-in force testing machine and the load curve machine market, which are roughly divided into the following cases: Built In Valve,Micro Switch Built In Gas Valve,Micro Switch Valve For Stove,Microswitch Valve Of Burner GUOLONG PRECISION VALVE CO.,LTD , https://www.glstovevalve.com
1. The early plug-in testing machine imported from Japan and Taiwan companies is of course in the market. Of course, the quality is still OK, but the price is not quite satisfactory. In particular, the plug-in force testing machine imported from Japan, the load curve meter has been used in the market for more than 10 years, and is basically in a state of elimination. Japanese testing machine machining and machining are world-class, but they are still unsatisfactory in terms of program control. Like the Japanese 1305 series test machine, the program is not comparable to Taiwan and its current mainland production test machine.
2. The second generation is the insertion and extraction force testing machine of a certain brand in Taiwan. The load-displacement curve instrument and the mainland have independent intellectual property rights. The State Intellectual Property Office issues the patent certificate 1220S insertion force test machine and S205 load curve instrument. At present, the market share, the best word of mouth in the market is this generation of insertion force testing machine, load curve instrument. The two test machines are independently developed and produced by Dongguan Membrane Instrument, the only patented 1220S insertion force testing machine and S205 key switch load curve instrument.
3, Later, because someone specializes in testing procedures, it is sold to so-called producers who have no development capability, forming a software for purchasing, hardware production, and the plug-in force testing machine and load curve meter. This type of testing machine will be slightly cheaper than the second generation, but the performance cannot be compared with the second generation testing machine. It can be said that it is a typical fake and shoddy product. Data transmission is a simple R232 interface, the sensor has no load protection, and even the report is the test machine supplier is not the customer's own company. After the client system hangs, the supplier may not be able to maintain it, or it is paid service, because the software does not understand. Even some so-called manufacturers can match the customer's requirements to meet the customer's requirements. According to current market feedback, customers who purchase such test machines will not be able to use the cost less than one year less than the second-generation test machine because the sensors are always bad. The impedance test is also an external impedance tester, and the impedance of the test cannot be displayed on the graph report at the same time.
4. Another type of insertion force test machine is a simple modification of the pull test machine program, which can be tested continuously. This kind of insertion force test machine is very cheap, but the test function is not complete, and there is no way to test such as longitudinal force. The protection function is incomplete, the sampling rate is low, and the sensor will be damaged as long as the upper and lower fixtures touch one piece. What is even more funny is that when the supplier trains the customer, the customer is required to not encounter the upper and lower fixtures, otherwise the warranty is not guaranteed. Of course, customers who purchase such plug-in force testing machines are usually doing simple tests or on a smaller scale.
As for how to distinguish which type of insertion force test machine at the time of purchase, I mentioned it in the previous article. I hope that customers can find the insertion force tester and load curve meter suitable for their company. If you have any questions during the purchase, you can call Wei Jia or send an email [email protected], and you can log in to find out more information.
Http://news.chinawj.com.cn 
Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn