one look Look at the material. The prices of various solid wood materials vary widely. When you buy, you can ask what kind of solid wood is. The sales documents can ask for the variety of wood. The first thing to do is to confirm that the wood is the same as the one marked. Can be observed in an inconspicuous place, such as the hole in the mounting screw, whether it is solid wood inside. It can be observed whether the plane side link part of the same part has natural wood grain and whether it is skinned. Look at quality Generally good furniture, after opening the door and drawer, the wood is dry and white, the texture is clear and clear, and the texture is compact and delicate. Furniture made from inferior materials cannot reach the above levels. At the same time, good furniture requires no irritating odor after opening the door or drawer. Look at the component Look at the force-receiving parts of the furniture (the sofa legs, the columns, the load-bearing bars that connect the columns to the ground, etc.) to ensure that there are no large knots or cracks or cracks. Look at the sliding and positioning of the drawers, open all the doors and drawers, make sure they are properly installed and useless. Pay special attention to the joints of heavy furniture components, which should be fastened with screw caps. Look at all the parts on the furniture that use wood-based panels to ensure that they have been edge-sealed to ensure that the various accessories are installed with a few pieces, no nails, no nails. Look at the place of origin Because the moisture content of furniture wood is affected by its production area, furniture with a moisture content higher than 1% of the average moisture content of the use area may crack, deform, fall apart, warp, etc. It is not important that the furniture produced by the enterprise is produced locally or locally. The key is that the moisture content should be consistent with the average moisture content of the area of ​​use. Second, touch Touch surface See if the polished surface is smooth and see if there are any protrusions that can break the clothing. Touch the foot Whether the stand and other parts are rough, and whether the pigment in the corner is too thick. Third, pressure Lightly press the various points of force of the furniture, such as the corner of the column, the drawer or the support of the shelf, and test whether it is stable. Pressing the surface of the furniture hard can not have a false impression, the panel flutters. Four Often inconspicuous, the back handwork and materials can best see the quality of the product. For example, if you choose a dining chair, you can flip the whole chair to look at the bottom. The bed can see whether the long wooden side of the supporting bed is smooth and tidy. V. Check Use other channels to verify whether the salesperson’s work on materials is overwhelming. Solid wood furniture also has some shortcomings. The price of various woods varies, and some woods are also deformed. Sometimes the stitching position will crack. Nowadays, many manufacturers will use the combination of wood and wood, that is, veneer (thin wood), solid wood, density fiberboard, etc., to produce more furniture with less color and less deformation. It is recommended to choose a certain class without stereotypes. It is best to be suitable.
Elevator Rope Fastening, Rope Fastening Ningbo Xinda Elevator Traction Technology Co., Ltd. , https://www.xinda-elevator.com
Elevator Rope Fastening
Wire Rope Fastening For Lift , Elevator Rope Fastener /
End
There is a learning in the purchase of furniture.
Jc001.load('iframe') JIFrame.create({ 'url' : '/go.php?action=ads&iframeHeight=250&isIframe=1&key=%BC%D2%BE%DF&pos_id=jc001_news_detail_30&reqkey=1&style=margin%3A15px+15px+ 25px+0%3B+height%3A255px%3Bwidth%3A255px%3B+float%3Aleft%3B', 'height' : 250 })