Here you can find the related products in Water Analysis Measurement, we are professional manufacturer of Water Analysis Measurement,PH Meter For Water Testing,Conductivity Meter For Water Testing,Tds Analyzer. We focused on international export product development, production and sales. We have improved quality control processes of Water Analysis Measurement to ensure each export qualified product. Water Analysis Measurement,Ph Meter For Water Testing,Conductivity Meter For Water Testing,Tds Analyzer Xi'an Gavin Electronic Technology Co., Ltd , https://www.gaimcmea.com
If you want to know more about the products in Water Analysis Measurement, please click the product details to view parameters, models, pictures, prices and other information about Water Analysis Measurement,Ph Meter For Water Testing,Conductivity Meter For Water Testing,Tds Analyzer.
Whatever you are a group or individual, we will do our best to provide you with accurate and comprehensive message about Water Analysis Measurement!
My company put into operation the new G105-1 single screw pump
Compared with piston pump, centrifugal pump, vane pump and gear pump, the single screw pump has the following advantages due to its structure and working characteristics: Today's latest valid order information is free to send! Morning latest buyers information free to send! Punch grab Rob here! 1, can transport high solids content of the medium; 2, uniform pressure flow stability, more obvious when low speed; 3, the flow rate is proportional to the pump speed, which has good variable regulation; 4, Viscosity medium; 5, the pump can be installed at any tilt position; 6, suitable for conveying sensitive items and susceptible to damage by centrifugal force and other items; 7, small size, light weight, low noise, simple structure, easy maintenance. Selection of single screw pump: Selection of pump specifications is based on the nature of liquid being transported and flow, pressure to determine, and the pump speed by the viscosity and corrosive liquid delivery, as the main parameters to choose, in order to ensure reliable pump run. Pump design speed for the transmission of water or water similar non-corrosive liquids allow the maximum speed, in actual use due to the nature of the media and life requirements are different, the selection should generally be lower than the design speed. For high viscosity and medium containing particles, the design speed of 1 / 2-1 / 3 or lower is generally used. Low speed is good for pump wear. However, the wear rate of the stator decreases after use. At this time, the speed can be properly increased , To compensate for the decline in traffic is also a policy. Transmission medium temperature should be -10 ℃ ~ 80 ℃ in special cases up to 120 ℃. The normal pressure of each stage of the pump (one lead of the stator) is 0.6 Mpa, allowing up to 0.8 Mpa in a short period of time (less than 30 minutes), and gradually decreasing the volumetric efficiency at the same output pressure when worn. Pumping water maximum suction is 8 meters, the actual use of recommendations not exceeding 6.5 meters, when pumping high-viscosity media, should be positive pressure inhalation.