The output waveform of the current is a square wave, ensuring that the strobe output is instantaneously a uniform high power output. All parameters (frequency flashing, flashing) can be set by connecting to the computer via RS485 bus (sudden power failure will not lose the already set data). Vinyl Floor,Flooring Wood,Pvc Flooring Plank,Wood Pvc Flooring DONGYANG MAOSHENG PLASTIC CO.,LTD , https://www.maoshengflooring.com
China Hardware Business Network http://news.chinawj.com.cn Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn LED frequency flash power supply Product Name: LED frequency flash special power supply Product model: FY-PSDY200 Updated: 2014.09.16 Views:
7 Product details
1. The flashing frequency is up to 500Hz, the flashing time is accurate to 1ms, the instant triggering and delay triggering are accurate to 1ms, and the multiplier is built in, so as to ensure the synchronization of the lamp body and the camera fool.
2. When the trigger signal is not received, the strobe of the weak light is used to achieve the warning function. The camera capture signal is used to instantaneously capture the peak power (200W).
3, all parameters (frequency flashing, bursting flash) can be connected to the computer through the RS485 bus to set up (sudden power failure will not lose the already set data).
4, the output waveform of the current is a square wave 
To ensure that the strobe output is instantaneously a uniform high power output.
5, instant callback, can guarantee continuous high-power flashing in a short time.
6, no stimulation to the human eye, does not affect driving safety.
7. With adjustable light switch, you can set the fill light under different darkness. Daylighting can be used to stabilize the sun backlight.
8, the spot is even, the camera video and capture effect is good.
9, because it is usually stroboscopic or weakly bright, so the power consumption is low, the whole lamp temperature is low, and the life is several times that of ordinary LED lights.