Many consumers have a misunderstanding in the process of purchasing wooden doors - only solid wood is good. In fact, the solid wood door currently on the market is not all solid wood. Many consumers go to the wooden store to buy products. The first sentence is to ask if it is all solid wood. Once you hear the negative answer, turn around and turn away. In fact, this is the reason for the lack of understanding of modern wooden doors. According to the different price points of wood, the solid wood doors in the general market are very few. If the solid wood door is not working well, it is very easy to deform. Pine, fir, eucalyptus, etc. are all relatively low-grade wooden doors, high-grade solid wood has walnut, cherry, Sapele, red pear, rosewood and so on. The solid wood door is consistent with the original wooden door on the wood, that is, the wood is promised both inside and outside. There is no difference between the appearance of the solid wood door and the original wood door. The paint oil process is close to the original wood door and the paint film is full. Applicable to middle and high income families, practical and environmentally friendly, beautiful and generous, simple hand-carved flowers are especially good. The door core of the solid wood composite door is mostly made of pine, fir or imported filling material, and the outer density board and solid wood veneer are made by high temperature hot pressing, and the solid wood line is used for edge sealing. General high-grade solid wood composite doors, the door core is mostly high-quality white pine, the surface is solid wood veneer. Since the white pine has a small density, is light in weight, and is easy to control the water content, the finished door has a light weight and is not easily deformed or cracked. The solid wood composite door also has the characteristics of heat preservation, impact resistance, flame retardancy, etc., and the sound insulation effect is basically the same as that of the solid wood door. Due to the variety of styles of solid wood composite doors, rich styles, or exquisite European (European decoration renderings) carved, or Chinese, classical color mosaic, or modern fashion, different decorative style doors give consumers a wide selection of space, thus Also known as solid wood style door. The high-grade solid wood composite door not only has the characteristics of smooth handfeel and soft color, but also is very environmentally friendly and durable. The solid wood composite door has the characteristics of smooth hand feeling and soft color, which is sturdy and durable, and is not easy to crack. It belongs to medium and high-grade products. Solid wood door installation method: first step: 1. Lay the gasket and place the tools on the gasket in turn. 2. Open the product package and take out the product and place it on the gasket. 3. Check the product for damage and make a record. 4. Start the installation. The second step: 1. Assemble the door frame with self-tapping screws. third step: 1. Place the door frame in the corresponding door opening. 2. Fix the door frame in the door hole with wooden wedges and wooden struts. 3, wood wedges, wood support should pay attention to the point of difficulty. the fourth step: 1. Shake the styrofoam before using the styrofoam and shake it about 30 times. 2. Inject the styrofoam into the gap between the door frame and the door opening, three points on the left and right, two or three points above. 3, the injection should be uniform, the injection area is about: the thickness of the door frame * (150mm-200mm). the fifth step: 1. After the gun glue is completely cured, remove the wooden wedge and wooden support. 2. Install the door lock and hinge on the door leaf. 3. Install the lock plate on the door frame. 4. Install the door leaf on the door frame. 5. Debug the opening of the door leaf to check whether it is flexible. The sixth step: 1. Install the door line. 2. When installing the doorway line, add an appropriate amount of white glue to the door frame slot. 3. Install the door line to install the side line on both sides, then install the upper line. 4. If the raft and the groove are too tightly fitted during installation, the shovel of the door line can be treated with a hand planer. Remember not to be hard, especially on the upper line. 5. After the installation is completed, a comprehensive inspection and debugging of the entire door should be carried out to ensure the installation quality of the product. 6. Finally, use the silica gel matched with the wall to close the door line and the wall and the ground junction. The user can also use the mortar to close the mouth, depending on the situation. The bathroom must be closed with silicone on the door line and the wall and ground junction. [ Follow the WeChat public account "Jiuzhengmen Window Network"; pay attention to courtesy, scan code to send millions of business opportunities! Jiuzhengmen window network exchange group ] Holiday Light,Led Christmas Lights,Led Festival Light,Festival Decoration Lights Guangdong Smart Street Lighting Co., Ltd , https://www.fldlight.com