The hardware must be able to adapt to the humid environment of the kitchen, soot and many other factors, its quality is also crucial for the normal use and life of the cabinet. The most important thing to test is the hinge. It not only must accurately connect the cabinet and the door panel, but also bear the weight of the door panel alone, and must maintain the consistency of the door arrangement. Otherwise, after a period of time, it may be tilted back and forth, slipping off the shoulder. Among the world's high-quality brands, Haitis, Ferrari, Salice, Blum, Grasse, etc. belong to the first camp. “Hettich†has excellent performance as the world's top brand. Its steel thickness, high base, long arm length, free positioning and no displacement, and opening life can reach 100,000 times. The whole drawer is designed. The most important accessory is the slide rail. Due to the special environment of the kitchen, the low-quality slide rails feel good even in a short period of time. Cabinet manufacturers of well-known brands generally use better quality slides, such as "Haifulue", "Hettich", "Spanish bottom track" and so on. Concerned about surprises Label: Hardware knowledge Previous: Precautions for welding and cutting equipment Next: Maintenance steps for automotive molds
Sealand is a professional supplier of Water Mass Flow Meter, Beverage Mass Flowmeter, Water Mass Flowmeter, Beverage Mass Flow Meter, Palm Oil Flow Meter, ATEX, IECEx & CE approved.
It has self-diagnosis function.
The transmitter & software will self-diagnose once powered on/ connected.
Please keep the meter in good condition during transport, better packed in the original
package from the manufacturer.
a) Waterproof and moisture-proof;
Water Mass Flow Meter, Beverage Mass Flowmeter, Water Mass Flowmeter, Beverage Mass Flow Meter, Palm Oil Flow Meter Zhejiang Sealand Technology Co., Ltd. , https://www.sealandflowmeters.com
The transmitter will show error code immediately on the top of display if there is anything
wrong.
1.Error 01: Sensor error; 2.Error 02: Temp. sensor overrun;
3.Error 03: Zero failed; 4.Error 04: Transmitter initializing.
To callout the interface on software, click tool bar > Functions > Status. The light in front is
green when everything is fine, but will be red if there is any error.
Please make sure the site meets following requirements, if keep the meter in storage.
b) With few mechanical vibration and crush;
c) Temperature from -30°C to +65°C;
d) Humidity less than 80%, better about 50%;
e) Please clear up the sensor if storage used one;
f ) Performance will be influenced if storage in the open.