There are several situations in the battery. You can check whether the electrolyte is not available. You can re-add distilled water or replenishing solution. After charging, try charging. There is also a situation where the plate may fall off or short circuit. This kind of phenomenon is more troublesome. What should I do if I need to open and repair the lead-acid battery to display 0V? What caused it? Condenser Coil Cleaner,Air Conditioner Coil Cleaner,Ac Condenser Cleaner,Homemade Ac Coil Cleaner LONG TERM ELEC. CO., LTD , https://www.longtermhvac.com
There are several situations in the battery. You can check whether the electrolyte is not available. You can re-add distilled water or replenishing solution. After charging, try charging. There is also a situation where the plate may fall off or short circuit. This kind of phenomenon is more troublesome and needs to be opened for repair. This may be caused by external short circuit or overcharge of the battery, reverse charging (forced over discharge) or internal short circuit of the battery, or micro short circuit. After checking out the problems with the battery, you can carry out the repair. Xiaobian here reminds you that when charging, put the battery in a place where no one is empty, and there is no combustible material to avoid unnecessary unsafe conditions in the battery during charging. loss. Reference: What is micro short circuit? Mainly from the micro-powder or bump on the positive and negative electrodes pierce the diaphragm, causing the internal short circuit of the cell, the lighter will have a higher self-discharge rate, which will cause the battery to explode. Http://news.chinawj.com.cn Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn