In the current housing, the problem of latex paint cracking may occur frequently. Most owners may think that the newly bought house is a rough house, and the wall is treated by the base layer. The latex paint is a decorative wall material commonly used in decoration. The latex paint wall is beautiful and beautiful, smooth and smooth, and is loved by many people. However, the problem of cracks often appear on the wall of latex paint, which can be annoying. Today, Xiaobian will come with you to see how to deal with latex cracks on the wall surface and precautions! How to deal with latex paint wall cracks The cause of cracks in the wall surface of latex paint. There are usually five reasons for latex wall cracking. First, there are cracks in the insulation layer of the original house, which leads to cracking of the wall after the decoration; secondly, the wall is not repaired after the groove is grooved, resulting in cracks on the wall surface shrinkage; the third is the inaccurate ratio of the cement when plastering, the ratio If it is high, it will be easy to crack; the fourth is improper matching of the wall putty or the unevenness of the scraping; the fifth is the cracking of the wall caused by the inappropriate ratio of latex paint and water. Latex paint wall crack treatment method. If there are small cracks in the indoor wall, it is necessary to see whether the wall is a load-bearing wall or a partition wall. The position is the door and window opening or the wall inside the room. If there are many small cracks in the area on one surface, it means there is an empty drum here. . There is a problem with the quality of the plaster. It is necessary to eradicate the original putty, re-paste the plaster, and after drying, use oxalic acid for partial cleaning, but not alkaline, so as not to affect the putty and paint. The professional patching method is this: 1. Cut the crack into a “V†shaped filling port with a cutting machine. The outer mouth is 1.5-2cm wide and 1.5cm deep. 2. Clean the V†shaped filling port and close the bottom of the wall with an interface treatment agent or white latex. 3. Fill the V-shaped filling port with a mixture of white latex + water + caulking gypsum powder, fill it and let it solidify and dry. 4. After the filler is dried and solidified, stick it with a good quality white kraft paper on the outside of the “V†shaped filling port to allow it to dry naturally. 5, about a day after the use of a good cloth attached to the top of the kraft paper, you can consider the cloth a little wider, until it is dry. If the fourth step is done, the “V†shaped filling port is not the same as the wall surface. After leveling with gypsum powder, proceed to step 5. Instead of leveling with putty. 6. After the sanding is flat, the latex paint can be applied according to the normal process. Latex paint wall crack treatment precautions The cause of the wall crack may be caused by both the material and the construction quality. The treatment method can be selected according to the crack situation at home, and the repair is carried out. After all, the new home has been renovated, for the sake of good decoration effect and economical You must learn to choose a reasonable method, give your family a good "face", and give yourself a clean and comfortable environment. Latex paint wall cracks will affect the overall decoration effect, unsightly, but many friends are often helpless in this situation, the above is how to deal with the latex paint wall cracks introduced by everyone today and the precautions are over here. For more information, please stay tuned to the renovation home. More related wonderful reading: Method for cleaning wall surface, cleaning method for latex paint wall surface
the led ceiling fan category is included ABS Ceiling Fan light ,like this 5 blades ceiling fan light . it is fan and light 2 in 1 together.
the led ceiling fan is included blades , lamp shape , canopy , motor and down rod .about the blades material , it also has abs ,plywood,iron,
wood.
this is the retractable led ceiling fan .the blades will stretch out and put inside automatically .
the wood led ceiling fan is made for the solid walnut wood blades , pass the organic certification .
about the led ceiling fan motor , it is whole inverter cooper motor , it is save energy and silent when working . it is high quality and durable , and
not easy to broken .
solar and rechargeable fan,led light solar fan,electric fan solar,solar ceiling fan with solar panel JIANGMEN ESCLIGHTING TECHNOLOGY LIMITED , https://www.esclightingfan.com
