In the previous article, we introduced the double-decker bar, the home-made bar, and now it is still about the bar. If a friend who likes wine tasting may wish to build a bar at home, it is both beautiful and practical, and functional. The design of the family bar is a technical activity. It is not a matter of careful thinking. Next, Xiaobian will take everyone to look at the content of the family bar design . 1, wall-mounted bar This design method refers to the fact that the bar is placed close to the wall, and on the top of the table, you can put some partitions or design a cabinet to place the items. The advantage of this design method is that it has a small footprint, so it can be designed in any restaurant, study or bedroom, but at the same time it can accommodate a relatively small number of people, so it is suitable for small-sized families. 2, corner bar This design method means that we can use a corner or corner area at home to arrange it in an L-shaped or curved bar. This bar can usually sit down 3-4 people in an open design, but we need to consider the moving lines of people, which is more suitable for spacious and open space design. 3, partition bar This design method means that we can combine the bar with some cabinets, such as bookcases, wine cabinets or consoles, etc., and then place it in two areas, so that it can be used as a partition. At the same time, it can also make the field of vision more transparent, more suitable for design in the public area of ​​the home. 4, corner bar This design method refers to the use of a corner space in the home, such as the space between the corridors or behind the door, etc., so that not only can these space be used, but also the space utilization rate can be improved. However, the position of this type of bar is generally small, and the shape that can be designed is limited, and it is usually suitable for one person. Generally speaking, the bar should not be too high or too low. Its height can be determined according to the height of the user. Generally, its operating platform should be about 90cm away from the ground. If it is a single-layer bar, its size is generally around 110cm. If it is a double-bar counter, its height is between 80cm and 105cm, and the width must be at least 25cm, so that we can use it. article. When designing, we can choose its shape from the size of the home space, its own hobbies and needs, etc. It is best not to blindly design, we still need to pay attention to some heights, so it will be more convenient to use later. The above content is a wonderful introduction to the design of the family bar. I hope that every reader can be heard and applied in real life, and you will benefit a lot. Well, today's introduction to the design content of the family bar is here. Thanks to the readers for reading this article and for the support and love of Xiaobian. If you want to get more information about home decoration, please continue to pay attention to the decoration. Home network. More related wonderful reading: Family bar decoration renderings family bar design drawing Family bar design skills, small young bourgeoisie Steel Rope Wire,Stainless Wire Rope,Stainless Steel Wire Rope,Stainless Steel Aircraft Cable Jiangsu Hongze Stainless Steel Wire Rope Co., Ltd , https://www.hzrope.com
