Steel production hit a new high. According to data released by the China Iron and Steel Association yesterday, the crude steel output of 76 key enterprises in the country in the second half of June was 16.9623 million tons, and the average daily output was 1,692,300 tons, an increase of 3.21% over the previous ten days; three companies did not report production. According to this estimate, in the first ten days of the country, the production of crude steel was 2.018 million tons, and the average daily output was 2.018 million tons, breaking through 2 million tons for the first time. In addition, the cumulative daily crude steel output in June was 1.954 million tons. “The plate market is not good. Due to the good long product market, the production of long products is very positive.†Hu Yanping, an analyst at China United Steel Network, told the “First Financial Daily†yesterday. In the first half of this year, the operating rate of steel mills has been at a relatively high level, and steel production has therefore reached a new level. The operating rate of steel mills has been at a high level since the second quarter, and the daily output of crude steel has always been higher than 1.9 million tons. At the beginning of May, the price of construction steel was eye-catching, and then it was affected by factors such as the general environment and the continued decline in industrial prosperity until the end of June. Hu Yanping believes that when the price of this round falls to the vicinity of the cost line, it will be supported. At the same time, the steel industry will re-energize after hitting the low point of the year in late July or August, and it needs to prepare for the next production season. The increase in volume, coupled with the arrival of the peak period of affordable housing, will boost the steel market. Liu Huifeng, an analyst at China Iron and Steel Research Center, believes that the next one to two months will be the low season for the downstream steel industry. In addition, due to excessive inflationary pressures, it is still possible to continue tightening policies. Therefore, the probability of steel price decline is higher before the end of July. . However, Liu Huifeng also believes that by the end of the third quarter, with the concentrated start of affordable housing, it will bring about 25 million tons to 30 million tons of construction steel demand, and the steel price will be more likely to move up. On the other hand, since late June, Toyota and other Japanese car companies have begun to recruit temporary workers on a large scale to ensure production capacity. Therefore, it is expected that the automobile production will gradually recover after the third quarter, when the demand for sheet metal will be improved. There are five general body styles of ball Valves: single body, three-piece body, split body, top entry, and welded. The difference is based on how the pieces of the valve-especially the casing that contains the ball itself-are manufactured and assembled. The valve operation is the same in each case. Stainless Steel Ball Valves, Brass Ball Valves, Sanitary Ball Valves, Water Ball Valves ZHEJIANG KINGSIR VALVE CO., LTD. , https://www.kingsir-valves.com
In addition, there are different styles related to the bore of the ball mechanism itself.
Ball valves in sizes up to 2 inch generally come in single piece, two or three piece designs. One piece ball valves are almost always reduced bore, are relatively inexpensive and generally are throw-away. Two piece ball valves are generally slightly reduced (or standard) bore, they can be either throw-away or repairable. The 3 piece design allows for the center part of the valve containing the ball, stem & seats to be easily removed from the pipeline. This facilitates efficient cleaning of deposited sediments, replacement of seats and gland packings, polishing out of small scratches on the ball, all this without removing the pipes from the valve body. The design concept of a three piece valve is for it to be repairable.
Innovative high-protection housing for steel production will result in 25 million to 30 million tons of demand
Abstract Steel production reached a new high. According to data released by China Iron and Steel Association yesterday, the output of crude steel in 76 key enterprises in the country was 16.9263 million tons in the second half of June, with an average daily output of 1,692,300 tons, an increase of 3.21% over the previous decade; three companies did not...