Shelf lighting is a lighting solution specifically designed for commercial and retail environments. Its goal is to highlight and display the goods on the shelves by providing appropriate lighting to attract customer's attention and increase sales. Lighting Solution,Directional Lighting,Warehouse Lighting LED,Lighting Technology,Local Lighting SHENZHEN LITEHOME OPTOELECTRONIC TECHNOLOGY CO., LTD. , https://www.szlitehomelight.com
The classification and layout of shelf lighting can be selected according to different needs and scenarios. LED lamps are the most commonly used shelf lighting technology and are favored for their high efficiency, long life, and dimmable characteristics. Overhead lights and strip lights are common installation locations and can be selected according to the needs of the appropriate way to provide overall or local lighting.
In terms of lighting layout, uniform lighting, and directional lighting are common choices. Uniform lighting ensures consistent lighting intensity for merchandise by providing a balanced distribution of light across the entire shelf. Directional lighting uses lamps such as spotlights or downlights to focus light on specific goods or display areas to highlight their characteristics.
Lighting control is also an important consideration. The dimmable lighting system can adjust the lighting brightness as needed to adapt to different environments and product display needs. Smart lighting systems automatically adjust lighting intensity and color through factors such as sensors, timers, or external conditions, providing greater flexibility and energy efficiency.
Through the appropriate shelf lighting program, businesses can create a pleasant shopping environment, highlight product characteristics, attract customers' attention, and improve sales performance. Shelf lighting plays an important role in modern retail, providing businesses with a means to promote products effectively.
Test pressure pump operation steps and application examples
Pressure pump structure by the pump, plunger, seals, control valves and other components, mainly used in pipes, boilers, cylinders, fire equipment and other hydraulic tests and laboratories to obtain high-pressure liquid Testing equipment, then how to operate in the use of the test pump it? Here is the test pump for you to introduce the steps and introduce an example of its application. Pressure test pump operation steps and application examples First, the pressure pump operation steps The first step, test pressure pump pipe water. Install the pressure gauge, water valve and other accessories, open the exhaust valve to be tested pipeline, close the drain valve, through the nozzle into the clean water until the water is filled pipe and over a certain value of the water valve, close the exhaust valve , Stop filling. The second step, test pressure pump with oxygen connection. The oxygen bottle (bottle pressure greater than the test pressure) on the rubber band connected to the water pipe. The third step, the pressure test pump slowly boost. Slowly open the valve on the oxygen bottle, pay attention to observe the pressure gauge on the oxygen bottle, pressurized to a certain value, you should stop to check the pipeline, no problem, then continue to pressure, generally 2-3 points rose to test pressure. The fourth step, pressure test pump pressure check. For low-pressure heat pipe, pressure holding time to 5-10 minutes is appropriate in the test pressure to maintain the time, such as the pressure gauge pointer does not drop more than 0.02MPa, and no distortion of the visual pipe, that strength test pass. Final pressure test pump tightness test. The pressure dropped to the working pressure, a comprehensive inspection of the pipeline can be used 1.5g below the head hammer in the seam 1.5-20mm Department gently tapping, such as pressure gauge pointer does not drop, the pipe weld and flange connection Department did not find leakage, that can be considered tight test. Second, the application of pressure test pump Test pressure pump in Xinyi Zhongli Road thermal pipe renovation project, the method was applied, Zhong Wu Road width 42cm, heat pipe ( 219) at a height below the road surface 3.5m After wearing my arms, rise on both sides of the road. After the installation of the pipeline, using the method of hydraulic pressure test, the test pressure of 0.9MPa, after the pressure reaches the test pressure 40 minutes, pressure gauge pointer no change. Extended reading: Top ten brands of motor China Construction Water Exhibition Pump manufacturers ranked ptc exhibition industry Internet (Xiamen) Technology Co., Ltd. Asia Pump Network Editor: He Daohui (QQ / WeChat:) http://beng.liuti.cn/ (service Hotline:)