Home decoration, a large number of wallpaper access more and more frequent. The wall treatment must be smooth and clean before pasting the wallpaper. If there is any irregularities or cracks on the wall, remove it with a blade and smooth it with a putty. Then dry it with sandpaper and smooth it. When using a large area of ​​wall, it is best to use old powder and cooked powder to make the wall more solid. If the seam can be used gypsum powder add a little oil to do putty. The best practice is to brush the walls up to two passes of varnish to do wall protection and protect against moisture. After drying, lightly sand it again with sandpaper. Do not brush more oil. This will cause the wall surface to be too smooth. This will cause the wallpaper to stick loose and shrink during the drying process. First, the main process of plasterboard surface wallpaper Cleaning, filling gaps, sandpaper polishing - seams at the seams - looking for putty, sandpaper polishing - brushing the glue at once - wall leveling lines - wallpaper brush adhesives - primary brush adhesives - wallpaper paste - Patchwork stitching, lap stitching, pairing with flowers - pressing adhesives and air bubbles - wiping out the extruding glue - cleaning and trimming Second, the wall surface treatment before paste wallpaper 1. The wall surface must be treated before pasting the wallpaper. The wall surface treatment is to make the wall surface smooth, clean, dry and crack-free, solid and free of dust. 2. If the wall of the cement brick wall is flat, use a putty to flatten it and apply a thin varnish to dry it. Gypsum boards, plywood, and planks have seams, so they should be patched and then ashed. 3, the function of varnish and sealer is to solidify and protect the surface of putty, but also can strengthen wallpaper anti-alkali function. The paint should be applied after the putty is completely dry. 4, wall treatment paste wallpaper and brush coating wall treatment is roughly the same, so the brush coating wall is suitable for changing wallpaper, but need to do a good sanding. Third, the wallpaper paste construction requirements Prior to the application of wallpaper, the quality of grassroots treatment shall meet the following requirements in accordance with the provisions of the National Standard of the People's Republic of China: Quality Acceptance of Building Decoration Engineering (GB50210-2001): 1. The old wall surface should be cleared of loose old decoration layers before painting the wallpaper, and paint the interface agent; the new building's concrete or plaster base wall should be painted with an alkali-resistant sealing primer before scraping the putty. 2, the base surface color should be consistent. The moisture content of the base layer of concrete or renders shall not be greater than 8%; the moisture content of the wood base shall not exceed 12%. The flatness of the grass-roots surface, the verticality of the facade and the angle of the yin and yang should meet the requirements for advanced plastering of the “Code for the Quality Acceptance of Building Decoration Engineeringâ€. 3. Apply a closed lacquer coating brush base before applying wallpaper. The base putty should be flat, strong, firm, non-powdered, and the bond strength of the peeling and putty should be in accordance with the regulations for “Building Interior Puttyâ€. 4. Finally, don’t forget to consider the environmental issues of using glue on wallpaper. Wallpaper paving three trees paint entrance decoration wallpaper wallpaper decoration paint interior decoration
IN WALL MOUNTED BATH MIXER
Concealed faucet is composed of embedded parts + panel + nozzle + handle and other accessories, first of all, the concealed faucet should be pre-laid with the pipeline, the pipeline is laid before do not connect the valve body, to drain first, because there is decoration sand and dust in the pipeline; After draining the water, connect the valve body to test the water and water pressure, and it will be OK if there is no problem. The wall is laid in the back, and then the external parts are connected. In case of damage, the valve core is broken, and it is the same as replacing the valve core with an ordinary faucet. IN WALL MOUNTED BATH MIXER,Bathroom Faucet Taps,Shower Sink Mixer,Faucet Sink Mixer WENZHOU CHENKAI SANITARY WARE CO.,LTD , https://www.cnchenkai.com
Aishe Wallpaper