3m 7403 Type Pneumatic Air Polisher with 3`` Pad

High Quality & Excellent Performance & Long Life & Best Service


Details of 3M7403:

1.Applicable for polishing  the surface of metal,furniture,alloy,glass fiber reinforced plastics(fiberglass),laptop,cell phone,automobile,plane,plastic,steamer etc;

2.Light weight , Low vibration and ergonomic design enable easy control with one hand;

3.Stable,smooth,durable and environmental;

4.Side variable speed control allows users to easily adjust speed for different applications;

5.OEM or ODM is available in our factor;

6.Various sanding pad & paper (Vinyl or Velcro type) are availabe as per specific demand.
 

Warm tips:

*Add 2~3 drops of air lube oil to the air sander before&after using.

*Rotate the air sander with nothing a few seconds after adding air lube oil

*Cheak before using.Add lube oil to lubricate and clean dust.

*If find any part broken or missing,do not use it until it is fixed.

*Assembling sanding pad and sandpaper when switch is on is prohibited

*Do not overload the sander and rotate it without sanding pad at high speed and it will be durable.

We are a leading manufacturer&supplier of air tools and related abraisves in China.
We supply
1) 1``~ 6``Air Random Orbital Sander/Polisher(3M & MIRKA Quality);
2) 2``~ 9``Air Angle Grinder (FUJI Quality);
3) Air Die Grinder (FUJI Quality);
4) Air Micro Grinder (Pencil Grinder);
5) Air Screwdriver;
6) Air Wrench;
7) Air Belt Sander;
8) Air Drawing Machine;
9) Air File;
10) Sanding Pad&Paper/Grinding Wheel/Sanding Sponge;
11) Air Squeezer;
12) Air Pull Setter;
13) Air Drill;
14) Air Spray Gun;
15) Squeeze Riveter(For Precision Machinery Industry such as Aviation etc.)
And so on.

For more details,pls do not hesitate to contact us : )

 

 

IECEx Approved Coriolis Mass Flow Meter

Zhejiang Sealand Technology Co., Ltd. is a trustworthy manufacturer of Mass Flow Transmitter, Coriolis Mass Flow Transmitter, Coriolis Mass Flow Sensor, Mass Flow Sensor & Mass Flow Sensor Coriolis, ATEX, IECEx & CE approved.

The meter can be connected with computer as follows. Connect the meter and computer with a USB-to-RS485 converter( converter A+ end to transmitter A+ end, B- to B-, and GND to GDN); turn to device manager of the computer to check COM port connected with meter. Start the software, select the right COM port and click Connect; do not change any other parameters (if you do not know the right one, click Automatic options on the left, click Connect, plug & unplug the transmitter, and then check if it is connected). You can click Connect on the tool bar to disconnect or connect again. It will shown Connected/Not Connected at the bottom of this interface.

The flow direction is settable. There are 4 options, forward(default), reverse, absolute value & bi-direction. There is a direction mark on the sensor. Forward means the same direction with the mark on sensor, the meter will only count the flow in this direction; reverse means the opposite direction of the mark, the meter will only count the reverse direction; bidirectional means that the meter will measure both directions, it increases when it is forward and decreases when reverse; absolute means it increases no matter it is forward or reverse.

Mass Flow Transmitter, Coriolis Mass Flow Transmitter, Coriolis Mass Flow Sensor, Mass Flow Sensor, Mass Flow Sensor Coriolis

Zhejiang Sealand Technology Co., Ltd. , https://www.sealandflowmeters.com