In terms of product form, conference room video terminals are generally hardware-level special equipment. The product is highly integrated and has a variety of external interfaces. It can be directly connected to the conference room audio-visual system, such as mixer, splitter, Projectors, multimedia speakers, TV sets, etc., are precisely because they can be connected to the TV in the conference room. The video conference system was also called the video conference system or the conference TV system in the early days. The so-called desktop video terminal means that the video conferencing system software is installed on a computer and the image output is generally only on the display. In terms of the image effect output by the system, the conference room video terminal can reach the size of the full screen of the TV (resolution 352 * 288), while the image of the desktop terminal can only occupy a corner on the computer monitor (resolution); The conference room video terminal is generally 8-10 times that of the desktop video terminal. In terms of bandwidth requirements, if the conference room video terminal requires better video and audio effects, the bandwidth needs to reach the upper and lower rate of 512K, while the desktop video terminal The bandwidth of about 384K is enough; in terms of application functions, conference room video terminals generally emphasize conference functions, which have high requirements for video and audio effects, while desktop terminals generally emphasize data functions, such as sharing programs, electronic whiteboards, collaborative browsing, Electronic voting, etc. There is no essential difference in the underlying technology between the two types of products, but due to the difference in performance requirements, the research and development technology requirements for conference room terminal products are higher. If you really need to ask the essential difference, then it should be the difference in customer needs is the essential question of choosing products. Medical Industry Mass Flow Meter
Sealand is a professional manufacturer of Medical Mass Flow Meter, Medical Mass Flowmeter, Medical Coriolis Meter, Medical Flow Meter, Medical Flowmeter, ATEX, IECEx & CE approved.
There are 2 optical switches for operation. The SET and SELECT optical switches are used to navigate the transmitter display. To
activate an optical switch, move your finger 1~2mm over the optical switch close to the
glass.
Mark:
The general operation is listed as follows.
On Main Interfaces
Activate SET to alternate mass and volume values.
Activate SELECT to alternate main interfaces.
Long activate SELECT to go to Setup Interface.
Long activate SET for total reset.
Back to Main Interface
Long activate SET & SELECT at the same time.
Select Submenu,
Parameters & Numbers
Activate SELECT to select the submenu, parameters or
numbers.
Activate SET to go to submenu or save parameters/numbers.
Save setup
Long activate SET to save the modified setup.
Back or Exit
Long activate SELECT.
Medical Mass Flow Meter, Medical Mass Flowmeter, Medical Coriolis Meter, Medical Flow Meter, Medical Flowmeter Zhejiang Sealand Technology Co., Ltd. , https://www.sealandflowmeters.com
In terms of product form, conference room video terminals are generally hardware-level special equipment. The product is highly integrated and has a variety of external interfaces. It can be directly connected to the conference room audio-visual system, such as mixer, splitter, Projectors, multimedia speakers, TV sets, etc., are precisely because they can be connected to the TV in the conference room. The video conference system was also called the video conference system or the conference TV system in the early days.
1. The display will timeout without any operation in 5 min.
2. During numbers input, the decimal point will come up automatically if the first digit is 0; if not 0, please activate SELECT until decimal point shows up.