Slip-On flanges or SO flanges are commonly lower in price than weld-neck flanges, and to this effect are a popular choice for our customers. It is welded both inside and out to provide suffcient strength and prevent leakage. Slip-On Pipe Flanges. As made obvious by their name, these pipe flanges slip over the pipe. They're manufactured with an inside diameter that is slightly bigger than the pipe's outside diameter. These attachments are connected to the pipe via fillet weld at the top and bottom of the flange. Slip On Plate Flanges,Slip On Flange,Class 150 Flanges,Carbon Steel Slip On Flanges Shandong Zhongnuo Heavy Industry Co.,Ltd. , https://www.zhongnuoflanges.com
The XKA28105300 CNC bridge moving beam gantry milling machine developed by Beijing No. 1 Machine Tool Plant was listed as a national high-end CNC machine tool and equipment major in early 2009. The machine has a total width of 22 meters, a height of 15 meters, a total length of 39 meters and a total weight of about 900 tons. With a maximum width of 10.5 meters, the gantry can complete the five-coordinate linkage machining and turning and milling composite machining of complex curved surfaces. It is the ultra-heavy-duty CNC gantry mobile dynamic beam five-axis linkage turning and milling composite machine with the largest width in the domestic gantry. One of the largest gantry machines.
The successful development of this product is an important achievement of Beijing No. 1 Machine Tool Plant's long-term adherence to technological innovation and innovation after introduction, digestion and absorption. Through this project, the company has mastered the design, manufacture and development and manufacturing of key and functional components for super-large and ultra-heavy CNC bridge-type gantry turning and milling machine tools. In the past two years, Beijing No. 1 Machine Tool Plant has invested 300 million yuan to transform heavy processing capacity, realized the overall casting and processing capacity of 130 tons of ductile iron workpieces, realized the assembly and manufacturing capacity of 600 tons of machine tools, and formed heavy and super heavy. The industrial capabilities of machine tools. At the same time, it has established a heavy-duty machine tool laboratory with Beijing University of Technology to provide sufficient theoretical basis and technical support for product development.
At the product delivery ceremony, General Qiu Ming said that Jingcheng Electromechanical Holding Co., Ltd. will continue to support and promote Beijing No.1 Machine Tool Plant to play a leading role in the domestic equipment manufacturing industry and improve the status of Beijing machine tool industry in the entire industry. In accordance with the requirements of building “Humanities Beijing, Science and Technology Beijing, Green Beijing†and world cities, we will continue to implement the decision-making spirit of the Beijing Municipal Party Committee and the Municipal Government on the development of the modern manufacturing industry in the capital, and accelerate the promotion of Beijing equipment manufacturing industry to high-end, high-efficiency and high- The development of the standard direction has made new and greater contributions to the revitalization of China's equipment manufacturing industry and the strengthening of secondary production in Beijing.
The world's largest heavy-duty CNC machine tool was born in Beijing
On September 29, 2010, the XKA28105300 CNC bridge gantry turning and milling machine tool developed and produced by Beijing No. 1 Machine Tool Plant was officially delivered at Harbin Steam Turbine Works Co., Ltd. This represents the birth of the world's largest heavy-duty CNC machine tool in Beijing, and it is also a breakthrough and improvement of domestic machine tools in the high-end CNC machine tools and ultra-heavy manufacturing. Qiong Ming, the general manager of the company, attended the delivery ceremony and spoke at the seminar. Lu Yanwei, former deputy director of the Ministry of Machinery Industry, consultant of the China Machinery Industry Federation, Wang Changfu, deputy director of the Equipment Industry Department of the Ministry of Industry and Information Technology, Wu Bolin, executive vice chairman of the China Machine Tool Industry Association, and Yang Qiguo and Yao Hongwei of Harbin Turbine Works Co., Ltd. Waiting for the delivery ceremony.