Smart Light,Smart Lamp,Rgb Light Bulb,Smart Led Lights Guangdong Smart Street Lighting Co., Ltd , https://www.fldlight.com
Frequency conversion series resonant test device test wiring and operation steps
Frequency conversion series resonant test equipment integrates pressure regulation, frequency modulation, control and protection functions, eliminating bulky regulators and providing easy operation and intuitive readings. Because the system Q value is higher (30-120), the limitation of on-site test due to the lack of power supply capacity is effectively solved.
Frequency conversion series resonant test device test wiring and operation steps
Test procedure
1. According to a variety of wiring methods for the sample, ensure that the contact point is good, to ensure a little grounding, and the grounding point is closest to the voltage divider.
2. Make sure the connection is correct and then turn on the power.
3. Turn on the main power switch to display the main menu
4. Move the cursor to: Test parameter settings; press OK. Modify each parameter, use up and down
And confirm button execution.
Then return to the main menu.
5. Move the cursor to: System Parameter Settings: Press the Enter key. Modify the time parameters and execute them with the up, down, left, right, and confirm keys.
6. Move the cursor to: Enter test: Press the enter key.
The voltage selection test method is to perform the test of the sample and execute it with the confirm key.
8. When selecting the manual test, the first thing to do is to find the resonance point of the sample, and use the up and down keys to make the test voltage at the highest point; after completing this operation, press the panel adjustment keys to shift with the left and right keys. Increase the excitation power When approaching the test voltage, use the right shift key to move the cursor to the decimal point and slowly increase the power to prevent the test product from breakdown. After the rated voltage, the host starts to automatically time to the set time to exit the test. When selecting the automatic test, these operations are not required as long as the confirmation key is pressed.
9. Pay attention to the safety distance of the sample before entering the test to ensure the safety of life.
10. Please do not change any test items in the main menu to prevent loss.