IN WALL MOUNTED BATH MIXER
Concealed faucet is composed of embedded parts + panel + nozzle + handle and other accessories, first of all, the concealed faucet should be pre-laid with the pipeline, the pipeline is laid before do not connect the valve body, to drain first, because there is decoration sand and dust in the pipeline; After draining the water, connect the valve body to test the water and water pressure, and it will be OK if there is no problem. The wall is laid in the back, and then the external parts are connected. In case of damage, the valve core is broken, and it is the same as replacing the valve core with an ordinary faucet. IN WALL MOUNTED BATH MIXER,Bathroom Faucet Taps,Shower Sink Mixer,Faucet Sink Mixer WENZHOU CHENKAI SANITARY WARE CO.,LTD , https://www.cnchenkai.com
Complex "Mechanical Worker"
I first met "Mechanical Worker" in the early 1980s. At that time, I just entered the workshop and my master booked a "Mechanical Worker" (cold processing). At that time, "Mechanical Worker" was still a 32-page booklet. . Whenever there is time, the master loves to sit by the tool cabinet and read the book. Don't look at it, the content inside is very rich. I remember that in the annual factory technology reform, the master can always get one or two awards. Therefore, influenced by the master, I also especially like to watch "Mechanical