Mobile phone burglar alarm standard function display shelf, internal alarm function, remote control switch system, backup rechargeable lithium battery, optional external DC-6V external power supply, optional tilting display stand or horizontal display stand frame. Can be used for all kinds of mobile phones, cameras, MP4 and other consumer electronics products real machine security display, so that display is more simple, customers buy products more convenient. Applicable to mobile phone hypermarkets, Telecom Mobile Unicom business hall, electronic digital city, digital camera counters, GPS counters, MP4 counters, home appliances supermarkets, supermarkets and all kinds of small and medium-sized electronic digital products exhibition.
We diviided the led light according to the using eviiroment. Most of our product is the commercial LED Lighting
Commercial lighting is a term used to describe lighting that is used in commercial spaces, including auto dealerships, distribution centers, churches, factories, offices, and warehouses. Unlike residential lighting, commercial lighting is made to withstand more abuse and has a longer lifespan.
While the focus of residential lighting is often on aesthetics, commercial lighting is task orientated. Commercial lighting systems are designed based on what the application is. For example, in an office-type setting, you may see task lighting, which illuminates specific areas where employees need concentrated light to be able to perform their jobs.
Suspend Linear Light,Linear Wall Sconce Lighting,Linear Wall Mounted Light Fixture,Linear Lights For Kitchen Jiangmen Dilin Lighting High-Tech Co., Ltd. , https://www.jmdilinlight.com
Mobile burglar alarm installation and maintenance:
1. Tear off the adhesive protective film at the bottom of the alarm and stick it to the desktop;
2. Connect the induction spring wire to the telephone line jack on the right side of the alarm;
3. Tear off the adhesive protective film on the square box of the induction spring wire, stick the back of the digital product to the square box of the induction spring wire, and stick the small contact to the front of the digital product. At this time, the alarm will sound twice continuously. A sound for the alarm alarm automatically start the second sound for the alarm to enter the working state;
4. Insert the power supply into the MCUSB socket on the left side of the alarm. At this time, the red light will illuminate to prove that the alarm has been charged;
5. Insert one end of the patch cord into the digital product and insert the other end into the MCUSB jack on the square box of the induction spring wire to charge the digital product.
6, pay attention to the alarm's factory password is 345, if there is a report on the remote control alarm continuously press the 3 4 5 key to unlock, if necessary, please change your own password, change the method to see the front of the package;
7. Change the password: Pull out the induction spring wire from the telephone line jack on the right side of the alarm. At this time, the alarm will alarm; press the password to release the alarm, and then press and hold the remote control's setting key to hear the sound, and then input the old one. When the password is correct, when the password is correct, the alarm will sound for two seconds. If it is not correct, it will not ring. Then enter the three-digit new password. At this time, the alarm will sound for 2 seconds and the new password will be modified again to complete the alarm.
The new password can be used. Note that the password is 3 digits. The new password must be the same for both inputs. If the input interval exceeds 15 seconds, the alarm will ring once to indicate that the password has expired.
8, forget the password: installed alarm removed from the desktop, with a paper clip inserted by the alarm on the back of the small round hole, this time the green light flashes 3 times, the alarm is restored to the factory status of the factory password is 3 4 5 ;
9, false alarm: generally digital products are not installed or induction spring wire is not connected stability, check the replacement of 3m plastic or induction spring wire can be repaired;
Do not alarm: generally no power or digital products are not installed alarm does not enter the working state Solution: Observe the green light of the alarm is flashing, if there is flashing, it means that the digital product is not sticky or the induction spring wire is not inserted;
If the alarm green light does not flash, please first charge the alarm, if the digital product is installed, if it does not solve the problem, please follow the second operation and maintenance;
10. If the problem is not resolved or there are other problems, please contact the dealer;
11, if the sticky when changing the mobile phone, please do not continue to use.