A Flush Mount is a type of Lighting Fixture that is installed directly
onto the ceiling, with no gap between the Lighting Product and the ceiling
surface. This type of Home Decorative Lighting is typically used in rooms with low
ceilings, as it takes up minimal space and provides a clean, streamlined
look. Flush Mount fixtures come in a variety of styles and sizes, from
simple and understated to ornate and decorative. They are often used in
hallways, bedrooms, and other areas where overhead Indoor Ceiling Light is needed.
Different places require different lighting effects and light source types. When choosing a ceiling lamp, it should be selected according to the actual situation of the place where it is used.
Consider the height of the room: For places with high heights, it is advisable to choose ceiling lights that can be adjusted in height and orientation to ensure illumination.
Pay attention to the quality and brightness of the light source: Choosing the right light source quality and brightness is an important factor in ensuring the health of your vision. When choosing a ceiling lamp, you should pay attention to choosing a light source with good quality and moderate brightness.
Consider the decoration style: The exterior design and color of the ceiling lamp should be in harmony with the decoration style of the room to ensure the overall beauty and comfort.
Flush Mount, Flush Mounts, Flush Mount Lighting, Flush Mount Light, Led Flush Mount,Led Flush Mount Light,Flush Mount Ceiling Lamp Zhengdong Lighting Co., Ltd. , https://www.sundintlighting.com
Burner pump maintenance and care
I plant the production and maintenance of the burner pump (1) Check the burner oil pump and pipe joints with loose phenomenon. Turn the burner pump by hand to see if the burner pump is flexible. (2) Add bearing lubricating oil to the bearing body. Observe that the oil level should be at the center line of the oil mark and the lubricating oil should be replaced or replenished promptly. (3) Unscrew the diversion plug of the burner oil pump body, and pour water (or slurry). (4) close the outlet valve and outlet pressure gauges and import vacuum gauge. (5) Move the motor to see if the motor is steered correctly. (6) Start the motor, adjustable pressure residue pump When the burner oil pump is operating normally, open the outlet pressure gauge and import vacuum pump, gradually opening the valve as it shows the appropriate pressure, and check the motor load. (7) Try to control the flow and lift of the burner oil pump within the range indicated on the sign to ensure the maximum energy-saving effect of the burner oil pump running at the highest efficiency point. (8) high-pressure residue pump in operation, the bearing temperature can not exceed the ambient temperature 35C, the maximum temperature shall not exceed 80C. (9) If there is an abnormal sound of the burner pump, stop immediately to check the cause. (10) Burner pump to stop using, first close the gate valve, pressure gauge, and then stop the motor. (11) The burner oil pump in the first month of work, after 100 hours to replace the oil, after every 500 hours, oil change time. (12) Often adjust the packing gland to ensure normal drip leakage in the packing room. (13) Regular inspection of the sleeve wear, wear and tear should be promptly replaced. (14) KCB-300 In the winter season, after parking, you need to unscrew the lower part of the drain plug to drain the media. Prevent cracking. (15) long-term disabled burner oil pump, the pump required to open all, dry the water, the rotating parts and joints coated with grease installed, safekeeping