The profiling mold is an indispensable process tool and an important processing reference in the pr

Cam drive is a widely used mechanism for achieving mechanical automation. The drum cam is widely us

When we are processing the parts of the GN6 high-speed overlock sewing machine, the oil pump worm (

The left and right clamping sleeves on the press connecting rod are used to fasten the screw rod. S

1. Introduction In the geometric modeling process of the mold, many standard parts are often encoun

I have a CA6150 lathe in our factory. The axial movement of the spindle occurs. After several adjus

In the early winter season, the widening of the temperature difference caused the pests outside the

In the new house decoration, we hope to have a warm, personalized indoor living environment, which

Tool materials have changed a lot, and CBN (cubic boron nitride), PCD (polycrystalline diamond),

This paper discusses the working principle and use characteristics of stepper motor, introduces sev

The research on the cold rolling technology of the 5×6 ventilation channel steel disc for the Th

There is an oiling process in the cold press forming production line. As shown in Fig. 1, a circula