The time spent on the ceiling will inevitably look old, and sometimes it will be found that the wall is blistering, cracking, or even peeling. At this time, we will repaint it. If you want to feel the fun of painting, do it yourself. Be sure to brush the ceiling, the edge of the lamp, and use the roller for a large area of ​​paint. If the corners and ceilings are to be brushed, they should start from the ceiling. →Related reading: How to diversify ceiling decoration Step 1: Clear the wall. There is a small white powder on the wall, indicating that the salt in the wall is “precipitated†during the drying process of the cement. At this time, you can brush it off with a nylon brush or iron brush. After a few days of observation, it is determined that there is no longer a white powder. Precipitate, and wait for the cement wall to dry and flat, you can paint. If the white powder on the surface of the cement wall is plentiful and continuously precipitated, after cleaning it, you can apply a primer on the surface of the wall to prevent salt erosion and the formation of wall cancer in the future; II Do not use oil paint or water-impermeable wallpaper within three months. Brushing or renovation. Step 2 In addition: Remove the peeling paint film. Remove the peeling film with a knife or iron brush, and then use a sandpaper to polish the surface. Step 3 Demolition: Remove paste pasted wallpaper. Step 4 Repair: Trim the surface. Fill the cracks in the pit with a batch cutter, wait until it is completely dry, and grind it with sandpaper. Step 5: Treat wall lesions. Step 6 Primer: Apply primer first. The "primer" coating is used exclusively for wall surfaces that do not require special treatment. For problematic walls, the "primer" that specializes in this particular problem must be selected for the problem. Step seven finishes: paint again. It is generally used paint. Step eight brush: brush from top to bottom. After the paint was evenly mixed with a wooden stick, the brushing process started from the ceiling and brushed again, so as not to cause the paint that had fallen from the smallpox to finish the finished wall. Wall construction paint cement paint wallpaper Flap Disc Adhesive
Single component Flap Disc resin adhesive glue for making flap disc:
Flap disc adhesive usage:
Composition ratio: A: B = 100:25 (weight ratio)
Available time: 25℃×25-35 minutes
Curing conditions: 25℃×4-5 hours of basic curing
72 hours for maximum strength
Flap disc adheasive glue features:
1. This single component expoxy glue is a room temperature solidification type, yellow brown viscous epoxy resin adhesive;
2. This flap disc epoxy glue can be cured at low or normal temperature, with fast curing speed and certain stop-flow;
3. after curing, the bonding part has high bonding strength, shock resistance, shock resistance, good hardness and good toughness;
4. good acid and alkaline resistance, moisture and waterproof, oil and dust resistance, moisture and heat resistance and atmospheric aging;
5. curing products have good insulation, compression resistance, high bonding strength electrical and physical characteristics.
Scope of resin flap disc glue application
1.. Flap wheel with handle chuck, flap disc, flap wheel, vertical flap disc, plastic flap wheel.
2.. ceramics, wood, glass, fiber products and hard plastic packaging bonding, has excellent bonding strength;
3.. not suitable for bonding elastic or soft materials.
The related abrasive products we can supply is Flap Disc Backing Pad, Abrasive Flap Disc , Bonded Abrasives , and Abrasive Machine such as Flap Disc Making Machine,Abrasive Belt Making Machine, Flap Wheel Machine , Polishing Machine ,Sanding Disc Machine, if you have any needs about abrasive tools, please kindly feel free to contact us.
Single componet epoxy adhesive,Flap Disc Adhesive,Flap Disc Epoxy Glue,Synthetic Resin Flap Disc,epoxy resin for flap disc Zhengzhou Jiading Abrasive Manufacturing Co.,Ltd , https://www.jd-abrasives.com
