[Automatic Switch, Free Your Hands]: Cabinet light has two working modes, Motion & Light Sensor Mode, Always On and Off Mode. In G mode, this counter light automatically turns on when it senses human motion within 10 feet in a dark environment, and automatically turns off after 20 seconds of inactivity. You can use these lights as normal light or safe light. Solar Motion Light,Best Outdoor Motion Sensor Lights,Indoor Motion Sensor Light,Outdoor Sensor Lights Ningbo Wason Lighting Technology Co.,Ltd , https://www.wasonlights.com
[Upgraded Version & More Bright Sensor Closet Light]: With 20 LEDs(Not 10 LEDs) for each light, up to 160 lumens, more bright than other LED closet lights in the market, very easy to find what you're looking for and perfect to light up in a large space where there is no light system, like the cabinet, wardrobe, stairs, etc. HIBOITEC motion sensor light is the best choice for you.
[Larger Battery Capacity & Rechargeable]: Built-in 1000 mAh high-capacity rechargeable battery, has larger battery capacity than other led cabinet lighting, easily to charged via USB. After fully charged, these closet lights last for up to 8 hours under on mode and last 1-2 months under motion sensor mode. NEVER replace AAA batteries frequently. Energy Save & Save More Money!
[Two Ways to Install]: Easy to install and remove without any other tools. Using Magnetic Back Design, can stick on any ironwork, allows you to change the its location you need. Or you can use the included tape to attach the iron to any non-ferrous product surface. When you need to charge or change position, you can take down the closet lights at any time.
Wald tool new product release for wind power, auto parts
PCD cutters have high strength and impact strength, and only produce small grain breakage when the impact is large. Therefore, PCD cutters can be used not only for precision machining and ordinary semi-precision machining, but also for specific shapes to fit. With the development of PCD tool materials, Wald PCD tools have rapidly expanded to the manufacturing industry, and their high performance has replaced traditional hard alloys in the automotive industry. The special PCBN threaded insert is applied to the automobile cylinder liner in the automobile engine production line. The Wald PCBN insert has high precision, small surface roughness value and good stability. Due to the fast processing cycle of the production line, the cutting speed of the PCBN insert is high (usually V≥500m/ Min), the tool life is long (the number of machining holes is ≥1000), and the blade life of multiple stations such as chamfering, stop, coarse and fine, should meet the durability requirements. High-speed cutting and high-stability machining of engine cylinder bore can be realized by PCBN tool. Typical cutting parameters are: V=500m/min, f=0.2～0.4mm/r, ap=0.2～0.7mm; machining surface roughness Ra≤1.6μm, tool life>1,000 pieces. The Wald PCD inserts are dedicated to wind turbine rotor blades DFT & DFS and are drilled at the fan blade joint.