Remote Monitoring Terminal is a compact device with battery supply, ultra-low power consumption, IP68 protection,
wireless communication and various sensor data collection function,in specific circumstance, multiple power supply options are
available. It is suitable for the monitoring fields without power supply condition and the harsh environment. It could realize the multifunction including data collection, storage, alarming and transmission for underground water, firefighting water, dam water, water
supply and drainage pipeline. Wireless Remote Terminal,Remote Monitoring Terminal,Piping Monitoring Terminal,Remote Telemetry Monitoring Xi'an Gavin Electronic Technology Co., Ltd , https://www.cngamicos.com
/*728*90 created on 2018/5/16*/ var cpro_id = "u3440131"; Home>Bearing knowledge>Detailed description and characteristic analysis of radial joint bearing Radial joint bearing detailed description and feature analysis
Radial spherical bearing detailed description and characteristic analysis. 1) GE-E type single outer ring; no smooth oil groove. Can accept radial load and small axial load in either direction. /*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';
.2) GE-ES single-slit outer ring; smooth oil groove. Can accept radial load and small axial load in either direction.
.3) GE-ES-2RS single-slit outer ring; smooth oil groove; seal ring on both sides. Can accept radial load and small axial load in either direction.
.4) GEEW-ES-2RS single-slit outer ring; smooth oil groove; seal ring on both sides. Can accept radial load and small axial load in either direction.
.5) GE-ESN single-slit outer ring; smooth oil groove; outer ring with stop groove. Can accept radial load and small axial load in either direction, but axial load is accepted by the stop ring; It can only reduce its axial load.
.6) GE-XSN double-slit outer ring (split outer ring); smooth oil groove; outer ring with stop groove. Can accept radial load and small axial load in either direction. When the retaining ring is accepted; it can only reduce its axial load.
.7) GE-HS inner ring has smooth oil groove; double half outer ring; after play, the clearance can be adjusted. It can accept radial load and small axial load in either direction.
.8) GE-DE1 inner ring is hardened bearing steel; outer ring is bearing steel. Kneading is formed during inner ring installation; smooth oil groove and oil hole. Bearing with inner diameter less than 15mm; no smooth oil groove and oil hole. Can accept radial loads and small axial loads in either direction.
.9) GE-DEM1 inner ring is hardened bearing steel; outer ring is bearing steel. Kneading is formed when the inner ring is installed; after the bearing is installed in the bearing seat; the end groove is pressed out on the outer ring to fix the bearing axially. Can accept radial loads and small axial loads in either direction.
.10) GE-DS type outer ring has mounting groove and smooth groove. It is limited to large-scale bearings. It can accept radial load and small axial load in either direction (the axial side of the mounting groove cannot be accepted).
Recommend to friends comments close window Bearing related knowledge Why is the bearing damaged?
The effect of over-finishing of NTN bearing on the life of the heavy-duty bearing. The precautions for the bearing of the bearing and the shaft of the pump.
This article links to http://
Please indicate China Bearing Network http://
Previous:Methods for selecting materials based on the service life and reliability requirements of FAG bearings Next: How to distinguish between imported bearings and true and false?
Radial joint bearing detailed description and feature analysis
Source: Bearing network time: 2014-01-01